light tester system

日期:2021-08-19 02:08
            light tester system
  Watt Wr fr  
  11W 10.8±1.3 W 56.1±4 KHz  
  14W 13.5±1.4 W 56.9±4 KHz  
  19W 18.9±2.2 W 53.5±4 KHz  
  22W 17.6±2.0 W 46.6±4 KHz  
Inspection Method:  
1.Connect Check wire(CH3,CH4/CH5,CH6) to pin (P3,P4/P5,P6) connected. [Load Resistor: 600 ohm]
   ( 300ohm resistor*2 [300Ω30W Cement resistor] series connection. )  
2.Connect Check wire(CH1,CH2)with power source of AC220V/50Hz to Lands or Wire (F1,P2).   
3.Measure DATA (Wr/fr) after 2 seconds from turn on.  
4.Turn off AC220V/50Hz, then Switch off the Load Resistor.   
(1) You should not to pull strongly when Wr/fr is measured.  
(2)Since a measuring method is different compared with other types, Pls Be careful.


test volt, WR,FR

粵公網安備 44030602001522號